Category Archives: Reflexite V92 DOT Tapes 6/6, 7/11 & White (popular)

1 Inch – V92 Reflexite 6/6 DOT Tape Rolls

Reflexite V92 – 6″ Red / 6″ White (silver) DOT Approved Reflective Tape

1″ x 30′ and 1″ x 150′ Rolls

1 Inch – 6″ Red / 6″ White Rolls Sold On This Page

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The pattern is an even 6″ red and 6″ white alternating pattern.  The rolls have the DOT-C2 logo imprinted on them.  The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.  1″ DOT tapes should be used for Non DOT applications such as marking trailers, boats, motorcycles, guardrails, fences, gates and vehicles.  (use 2″ and up for DOT apps) 

On this page we carry the Reflexite 6/6 V92 rolls in 1 inch rolls.  You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.  We normally ship out the rolls the day they are ordered.  If you need expedited shipping or need any assistance you an call us at 850-934-3157.




1 Inch – V92 Reflexite 7/11 DOT Tape Rolls

Reflexite V92 – 7″ Red / 11″ White (silver) DOT Approved Reflective Tape

1″ x 30′ and 1″ x 150′ Rolls

This 5-7 year rated conspicuity tape exceeds all State and Federal NHTSA & DOT requirements. The rolls on this page have the 7″ white / 11″ red alternating pattern.  The Reflexite rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.  1″ rolls are to be used for non DOT applications. (2″ and up are for DOT apps)  Examples of applications would be personal trailers, gates, fences, guard rails, non DOT regulated vehicles, bicycles.

On this page we carry the Reflexite 7/11 V92 rolls in 1 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered.  If you need expedited shipping or need any assistance you an call us at 850-934-3157.



1″ & 2″ – V92 Reflexite Solid White DOT Tape Rolls

Reflexite V92 – Solid White (silver) DOT Approved Reflective Tape

  • 1″ & 2″ x 30 foot rolls
  • 1″ & 2″ x 150′ foot rolls

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. This is a solid white (silver) roll. It has a silvery color in the daylight but reflects a bright white. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth. 1″ DOT can be used for a variety of non DOT applications such as marking vehicles, boats, motorcycles, guardrails, fences, bollards, gates and vehicles.  (For DOT applications on trucks use 2″ or above)

On this page we carry the Reflexite Solid White V92 rolls in 1 inch and 2 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.



2 inch – V92 Reflexite 6/6 DOT Tape Rolls

Reflexite V92 – 6″ Red / 6″ White (silver) DOT Approved Reflective Tape

2″ x 30′ and 2″ x 150′ Rolls

2 Inch – 6″ Red / 6″ White Rolls Sold On This Page

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them.  The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 6/6 V92 rolls in  2 inch rolls.  You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.



2 Inch – V92 Reflexite 7/11 DOT Tape Rolls

Reflexite V92 – 7″ Red / 11″ White (silver) DOT Approved Reflective Tape

2″ x 30′ and 2″ x 150′ Rolls – Standard and Kiss Cut (peel off strips on a roll)

This 5-7 year rated conspicuity tape exceeds all State and Federal NHTSA & DOT requirements. The rolls on this page have the 7″ white / 11″ red alternating pattern. The Reflexite rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface then apply pressure using a squeegee or soft cloth. 2″ rolls are certified to be used in DOT applications as well as other applications such as personal trailers, gates, fences, guard rails, non DOT regulated vehicles, bicycles.

On this page we carry the Reflexite 7/11 V92 rolls in 2 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.  Kiss cut rolls are also available. (KISS CUT rolls are continuous rolls where the tape has been precut or scored down to the liner. Think of it as 18″ pre-cut strips on a roll.) We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.



Roll Sitting Horizontal is the V92

3 & 4 Inch – V92 Reflexite 6/6 DOT Tape Rolls

Reflexite V92 – 6″ Red / 6″ White (silver) DOT Approved Reflective Tape

  • 3″ x 30′ and 3″ x 150′ Rolls
  • 4″ x 30′ and 4″ x 150′ Rolls

3 & 4 Inch – 6″ Red / 6″ White Rolls Sold On This Page

Our 3″ & 4″ Reflexite 6/6 V92 rolls consist of even 6″ red and white alternating stripes.  This is a very bright prismatic tape that can be clearly seen from over a thousand feet away.  Reflexite invented prismatic tapes and their products are superior to other brands because they are made in a single layer.  This means that the Reflexite tapes will not de-laminate or separate like other brands.  Reflexite tapes continue to reflect even after tremendous abuse. 3″ & 4″ DOT C2 (also known as C3) are certified for all DOT applications.  We recommend the wider DOT tapes for larger vehicles.  For example, Waste Management uses the 3″ rolls on their trucks.

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them.  The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 6/6 V92 rolls in 3 & 4 inch rolls.  You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.



3 & 4 Inch – V92 Reflexite 7/11 DOT Tape Rolls

Reflexite V92 – 7″ Red / 11″ White (silver) DOT Approved Reflective Tape

3″ x 30′ and 3″ x 150′ Rolls
4″ x 30′ and 4″ x 150′ Rolls


Our 3″ & 4″ Reflexite 7/11 V92 rolls consist of even 6″ red and white alternating stripes. This is a very bright prismatic tape that can be clearly seen from over a thousand feet away. Reflexite invented prismatic tapes and their products are superior to other brands because they are made in a single layer. This means that the Reflexite tapes will not de-laminate or separate like other brands. Reflexite tapes continue to reflect even after tremendous abuse. 3″ & 4″ DOT C2 (also known as C3) are certified for all DOT applications. We recommend the wider DOT tapes for larger vehicles. For example, Waste Management uses the 3″ rolls on their trucks.

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 7/11 V92 rolls in 3 & 4 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.

3″ & 4″ rolls of DOT tape sold on this page.


3 and 4 Inch – V92 Reflexite Solid White DOT Tape Rolls

Reflexite V92 – Solid White (silver) Daybright Reflective Tape

3″ x 30′, 3″ x 150′, 4″ x 30′ and 4″ x 150′ Rolls

3″ and 4″ rolls available on this page

Our 3″ and 4″ Solid White Daybright tape is for DOT applications where more visibility is desired.  This is a 5-7 year rated product that exceeds all State and Federal NHTSA & DOT requirements. The rolls are a silver white in the daytime and a bright white when reflecting at night. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth. 3″ and 4″ white tapes are compliant for DOT applications and can also be used for a variety of other applications such as marking vehicles, boats, motorcycles, guardrails, fences, bollards, gates and vehicles.

On this page we carry the Reflexite Solid White V92 rolls in 3 inch and 4 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.