DOT Approved Reflective Tape

Reflexite V92 – Solid White (silver) DOT Approved Reflective Tape

2″ x 30′ and 2″ x 150′ Rolls

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. This is a solid white (silver) roll.  It has a silvery color in the daylight but reflects a bright white. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth. 2″ DOT tapes are compliant for DOT applications. They are used in conjunction with our 2″ 6/6 or 7/11 red and white tapes.  The white is used to create the inverted L’s on the upper rear of the truck.  2″ DOT can also be used for a variety of other applications such as marking vehicles, boats, motorcycles, guardrails, fences, bollards, gates and vehicles.

On this page we carry the Reflexite Solid White V92 rolls in 2 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.

2″ X 30′ ROLL (SOLID WHITE/SILVER)

($39.99 PLUS SHIPPING) click below:

2″ X 150′ ROLL (SOLID WHITE/SILVER)

($99.99 PLUS SHIPPING) click below:

Reflexite V92 – 6″ Red / 6″ White (silver) DOT Approved Reflective Tape

3″ x 30′ and 3″ x 150′ Rolls

3 Inch - 6" Red / 6" White Rolls Sold On This Page

Our 3″ Reflexite 6/6 V92 rolls consist of even 6″ red and white alternating stripes.  This is a very bright prismatic tape that can be clearly seen from over a thousand feet away.  Reflexite invented prismatic tapes and their products are superior to other brands because they are made in a single layer.  This means that the Reflexite tapes will not de-laminate or separate like other brands.  Reflexite tapes continue to reflect even after tremendous abuse. 3″ DOT C2 (also known as C3) are certified for all DOT applications.  We recommend the wider DOT tapes for larger vehicles.  For example, Waste Management uses the 3″ rolls on their trucks.

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them.  The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 6/6 V92 rolls in 3 inch rolls.  You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.

3″ X 30′ ROLL (6″ white/6″ red alternating)

($79.99 PLUS SHIPPING) click below:

3″ X 150′ ROLL (6″ white/6″ red alternating)

($189.99 PLUS SHIPPING) click below:

Reflexite V92 – 7″ Red / 11″ White (silver) DOT Approved Reflective Tape

3″ x 30′ and 3″ x 150′ Rolls

This 5-7 year rated conspicuity tape exceeds all State and Federal NHTSA & DOT requirements. The rolls on this page have the 7″ white / 11″ red alternating pattern. The Reflexite rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface then apply pressure using a squeegee or soft cloth. 3″ rolls are certified to be used in DOT applications as well as other applications such as personal trailers, gates, fences, guard rails, non DOT regulated vehicles, bicycles.  Our wider 3″ rolls are especially recommended for larger trucks that want better visibility.  For example, Waste Management uses 3″ on their trucks.

On this page we carry the Reflexite 7/11 V92 rolls in 3 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.

3" rolls of DOT tape sold on this page.

3″ X 30′ ROLL (7″ white / 11″ red alternating)

($79.99 PLUS SHIPPING) click below:

3″ X 150′ ROLL (7″ white / 11″ red alternating)

($189.99 PLUS SHIPPING) click below:

Reflexite V92 – 6″ Red / 6″ White (silver) DOT Approved Reflective Tape

4″ x 30′ and 4″ x 150′ Rolls

4 Inch - 6" Red / 6" White Sold On This Page

Our 4″ Reflexite 6/6 V92 rolls consist of even 6″ red and white alternating stripes. This is a very bright prismatic tape that can be clearly seen from over a thousand feet away. Reflexite invented prismatic tapes and their products are superior to other brands because they are made in a single layer. This means that the Reflexite tapes will not de-laminate or separate like other brands. Reflexite tapes continue to reflect even after tremendous abuse.

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 6/6 V92 rolls in 4 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.

4″ X 30′ ROLL (6″ white/6″ red alternating)

($99.99 PLUS SHIPPING) click below:

4″ X 150′ ROLL (6″ white/6″ red alternating)

($229.99 PLUS SHIPPING) click below:

Reflexite V92 – 7″ Red / 11″ White (silver) DOT Approved Reflective Tape

4″ x 30′ and 4″ x 150′ Rolls

4 Inch - 7" White / 11" Red Sold On This Page

Our 4″ Reflexite 7/11 V92 rolls consist of 7″ white and 11″ red alternating stripes. This is a very bright prismatic tape that can be clearly seen from over a thousand feet away. Reflexite invented prismatic tapes and their products are superior to other brands because they are made in a single layer. This means that the Reflexite tapes will not de-laminate or separate like other brands. Reflexite tapes continue to reflect even after tremendous abuse. 4″ DOT tape is certified for all DOT applications as well as other applications.  We recommend the wider DOT tapes for larger vehicles and equipment.

This 5-7 year rated product exceeds all State and Federal NHTSA & DOT requirements. The rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth.

On this page we carry the Reflexite 7/11 V92 rolls in 4 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below.

4″ X 30′ ROLL (7″ red / 11″ white alternating)

($99.99 PLUS SHIPPING) click below:

4″ X 150′ ROLL (7″ red / 11″ white alternating)

($229.99 PLUS SHIPPING) click below:

Reflexite V92 – Solid White (silver) DOT Approved Reflective Tape

3″ x 30′, 3″ x 150′, 4″ x 30′ and 4″ x 150′ Rolls

3" and 4" rolls available on this page

Our 3″ and 4″ Solid White DOT tape is for DOT applications where more visibility is desired.  This is a 5-7 year rated product that exceeds all State and Federal NHTSA & DOT requirements. The rolls are a silver white in the daytime and a bright white when reflecting at night. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth. 3″ and 4″ white DOT tapes are compliant for DOT applications and can also be used for a variety of other applications such as marking vehicles, boats, motorcycles, guardrails, fences, bollards, gates and vehicles.

On this page we carry the Reflexite Solid White V92 rolls in 3 inch and 4 inch rolls. You can purchase both 30 foot and 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you an call us at 850-934-3157.

3″ X 30′ ROLL (SOLID WHITE/SILVER)

($79.99 PLUS SHIPPING) click below:

3″ X 150′ ROLL (SOLID WHITE/SILVER)

($209.99 PLUS SHIPPING) click below:

4″ X 30′ ROLL (SOLID WHITE/SILVER)

($99.99 PLUS SHIPPING) click below:

4″ X 150′ ROLL (SOLID WHITE/SILVER)

($289.99 PLUS SHIPPING) click below: