Reflexite V52 – “Diamond Plate Pattern” 7″ White (silver) / 11″ Red & Solid White (silver) DOT Approved Reflective Tape
2″ x 150′ Rolls in 7/11 pattern and solid white both with “diamond plate pattern”
Reflexite V52 10 year rated reflective tape with a “diamond plate pattern”. Exceeds all State and Federal NHTSA & DOT requirements. On this page we have the 7″ white and 11″ red pattern as well as solid white/silver rolls. The rolls have the DOT-C2 logo imprinted on them. The tape is easy to apply. Just peel off the backing and apply to a clean, dry surface. Then apply pressure using a squeegee or soft cloth. 2″ DOT tapes can be used for DOT applications such as marking tractor trailers. It can also be used to mark boats, motorcycles, guardrails, fences, gates and vehicles.
On this page we carry the “Diamond Plate Pattern V52” Reflexite 7/11 and solid white (see picture below) tape in 2 inch rolls. You can purchase 150 foot rolls by clicking the buttons below. We normally ship out the rolls the day they are ordered. If you need expedited shipping or need any assistance you can call us at 850-934-3157 or email firstname.lastname@example.org .
Author – Steven Cole (Economics, MBA) – 22 years experience in the reflective safety tape industry.